Analysis on Ernie Pyle’s on World War II Essay

In Ernie Pyle’s â€Å"On World War II†, he made a few statements. His statements are immediately about World War II, yet they can be applied to nearly every other war. Edward Pyle embedded his messages into the reading through the clever usage of rhetorical devices and figurative language. Of the few messages that Edward Pyle made, one of them is more prominent than the other. â€Å"Anything and everything is expendable.† Pyle was implying that in war, a man’s life is unfortunately no more important than the equipment he uses. This can be implied to almost any war that has happened before. The men and their equipment can be replaced almost instantly. The other message embedded within Pyle’s story is almost the opposite of the previous one. â€Å"There were the latest letters from home, with the address on each one neatly razored out-one of the security precautions enforced before the boys embarked.† Here, Pyle was talking about the importance of the otherwise â€Å"expendable† men. They are not just some replaceable toy soldiers to test out some new strategies. They have families and friends off of the battlefield. They might be only one person in the world, but they can be the world to one person; which means they are irreplaceable and undependable. Ernie Pyle uses rhetorical devices such as description to transfer his messages to the reader. His messages are about the individuals in the war, but can be implied to every large scale war. The main messages are opposites of each other; one is of the individual’s importance and the other of their unimportance.

The Dark Side of the Roaring Twenties

The Roaring Twenties, most of the things we hear about the twenties are of good, happy times and of advances in technology and medicine. When we picture the twenties, we picture people dancing, listening to jazz and driving Model Ts. Also, in the twenties, the pretty was quite prosperous. But, there was a dark side to the Roaring Twenties. Those years there were some troubling trends and events, which many forget when thinking of that decade; prohibition, organized crime, nativism and the return of the Ku Klux Klan. Ironically, the twenties are often thought of as a time with careless drinking, when actually, it was illegal in that decade to sell or consume alcohol. On January 16th, 1920, the Eighteenth Amendment went into effect. A ban on the manufacturing and distribution on alcohol was written into the United States Constitution. This ban was called Prohibition. People held mock funerals the day before the amendment came to pass. Some people and businesses even spent the weeks prior to the amend. ent stockpiling liquor. Prohibition came to be due to almost a century of effort that started with the temperance movement in the early nineteenth century. After the years of the American Revolution, there was a huge increase in drinking and alcohol consumption. Saloons began to pop up everywhere as hard working men tended to escape loneliness and exhaustion by drinking. Saloons also provided settings for other illegal activities such as prostitution and gambling. A number of people noticed the effects of alcohol consumption and began to try and stop it. First, they encouraged people to just limit their intake of alcohol; however, they eventually began to encourage complete abstinence. As time went on, these reformers went to political action and government intervention. Also, medical research began to show evidence on how alcohol consumption affected people’s health. Concern also arose about how much power breweries wielded as they pursued high profits. More groups, such as the Methodist Church, Women’s Christian Temperance Union, the Anti-Saloon League and the Prohibition Party began to join the movement against alcohol. All of these forces came together to help the passage of the Eighteenth Amendment. Prohibition caused a huge division in the people and citizens in the United States. One side supported the law, who were later identified as â€Å"Drys†, while the other side wanted to put an end to prohibition, identified as â€Å"Wets†. It was also very much disliked in areas with high immigrant populations. This resentment towards prohibition was due to the fact that it banned a practice that was acceptable in their own cultures. However, despite the law, people continued to drink. Some, who were too poor to afford liquor from bootleggers, resorted to brewing their own at home. The places where people would drink illegally were called speakeasies. There were also places called blind pigs, which were businesses that were designed to look legitimate, but housed a bar in a back room. To access these blind pigs and speakeasies, a password was typically required in order to ensure one wasn’t with, or associated, to law enforcement. Prohibition also led to a rise in organized crime. Organized crime did exist before prohibition, but gangs and mobsters saw another great area of profit with prohibition. By providing people who were willing to break the law with illegal liquor, they could make a fortune. But then, as more gangs began to compete, violence also increased. This is the time when the infamous gang leader, Al Capone, made his name. Eventually the atmosphere of lawlessness, violence and suspicion the prohibition created made people more and more uncomfortable. People then began to find the cost of prohibition too high and most did not see drinking, at least in moderation, as sinful. Prohibition finally ended in 1933 with the Twenty-first Amendment. Another issue that arose in the twenties was nativism. During the late nineteenth and early twentieth centuries, immigrants were welcomed into the United States because the country was growing and industrializing. Due to this, laborers were needed. Also, the United States was always proud of being a refuge for people fleeing hardship or mistreatment in their own countries, or looking for new opportunities for themselves and their children. Before 1890, most of the immigrants had come from the same countries as those who first settled in America. So they typically shared the same values as the original settlers. In the beginning of the twentieth century, most of the immigrants came from southern and eastern European countries. Some also came from Puerto Rico, the West Indies and Mexico. In contrast to the Protestant majority, these newer immigrants tended to be Catholics or Jews, and had different morals and values. By World War I, immigrants were pouring into the United States, and the majority of those immigrants were of this new variety. This alarmed the citizens on the United States. They felt their ways of life were threatened by the ways and beliefs of the newcomers. It was not just that the immigrants were economic competitors, or that their strange cultural practices threatened traditional values. It was also that they were thought to be harvesting dangerous and radical ideas about politics and social order. It was said they believed in socialism and anarchy. But most of the immigrants were too preoccupied by survival to worry about politics. They faced things such as poverty, mistreatment and struggled with learning a new language and fitting into a new foreign society. Nativism sentiment led to an event known as the Red Scare. Attorney General A. Mitchell Palmer became the leading figure in a movement promoting â€Å"one-hundred percent Americanism†. Palmer led a campaign against communists and other radicals and others who were thought to have the wrong ideas of America. Federal agents arrested more than four thousand suspects who were threatened with deportation, of which two hundred and forty-nine were sent back to Russia. Nativism also led to the rebirth and return of the Ku Klux Klan. In the previous century, the Klan was a group of white southerners who wreaked havoc on African Americans in an attempt to keep whites in control of the South after the Civil War. This time around though, they widened their focus to not only non-whites, but to non-Protestants as well. They also didn’t just stay in the southeastern states anymore, they spread all over the United States. Depending on where Klan members were located, they had different focuses. For example, members in New York primarily focused on Jews; in California, Japanese were targeted, while Mexicans were the victims in Texas. The Klan ran a campaign to recruit members and grew to about five million members, These members performed many of the same acts as the Klan did in the previous century such as; beatings, lynching and acts of intimidation (the most known being the burning of crosses on lawns). These acts spurred an investigation of the Klan in 1921, which, in turn, ended up giving publicity to the Klan and gaining them more members. The Ku Klux Klan gained more influence as some politicians began to support their cause. In 1924, however, the Klan’s numbers dwindled and their influence declined and they lost their legitimacy. All of these factors are not so widely thought about when thinking of the Roaring Twenties. But they brought much darkness to the decade and led to many events and trials that also contribute to the darkness. The twenties are masked by visions of dancing and driving cars. But the care-free and fun-loving thoughts of the twenties just disguise the dirty and grimy parts of them. From the lawlessness and organized crime provoked by prohibition to the hate crimes brought upon by nativism, there is no doubt that there was indeed a dark side to the Roaring Twenties.

Perception about consumer behaviour with respect to the environmental Research Proposal

Perception about consumer behaviour with respect to the environmental issues, is there influence of the environment courses of - Research Proposal Example (Ayres, 2012) Over the period of time, consumers have become ethical in nature with their buying decisions mostly being affected through their ethics. Global consumers now understand the consequences of their actions more clearly due to availability of more information and globalization effects. Environmental as well as ethical issues which were initially not highlighted are now being highlighted and discussed in public to better inform the consumers. There have been serious discussions regarding consumers in developed countries buying such diamonds and consequently helping finance war in such war torn countries in Africa. Considering the overall improvement in the consumer perceptions and knowledge, this research will attempt to explore and understand as to whether the industry has an impact on the consumer behavior. This research will further explore the efforts undertaken to stop this process and the overall degree of success achieved in this regard besides exploring as to how it can be stopped and whether awareness should be raised about it or not. (Campbell. 2004.)Â   The overall rationale for choosing this topic is based upon the fact that diamond industry generates more revenues by selling less therefore the overall flow of funds through blood diamonds may be higher and can be used extensively to finance the war. Further, this research is also significant in the sense that it presents a real life example of how industry wide phenomenon can actually have an impact on the consumers and their buying decisions. Literature Review There are many countries within Africa which depend upon diamonds as one of the key source of economic progress and revenue. For such countries, the revenue generated by selling diamonds in international market can help them achieve economic development and progress. However, for some countries, the revenues generated through selling these diamonds are diverted towards the purchase of guns and ammunition to support the war in many A frican countries. The diamonds which are sold for the purpose of financing the war are called blood diamonds or conflict diamonds. (Campbell,. 2004) In the wake of development in the product development and technology, today’s consumers are faced with multiple choices to buy a large number of goods and services at relatively affordable prices. The variety as well as the prices therefore allowed consumers to buy large volumes of such products and services and resultantly their supply also depends upon how much demand is being generated in international market. (Fram, and Baron, . 2004) The overall history of blood diamonds originates from Sierra Leone wherein a group with the name of Revolutionary United Front (RUF) attempted to capture the diamond mines to fund their struggle to restore democracy within the country. However, this trend flourished in other countries also wherein warlords used it as a credible source for earning revenues to fund their war efforts. Diamonds are considered as luxury goods and buying them at higher prices often involve an uncompromising consumer behavior from the buyers given the luxury and degree of prestige attached with it. Over the period of time, this issue and ethics related with

Feasibility of the Iphone Case Study Example | Topics and Well Written Essays - 1000 words

Feasibility of the Iphone - Case Study Example This study on the phone and its markets and marketing strategies, aims to understand just that. In order to understand the above, it is important to thoroughly understand the previous launch of iPhone in the US and how the marketing strategies there transformed into sales. It is then pertinent to answer the question on how the launch in UK affected the mobile phone market. Customer behaviour and levels of customer acceptance of the product are also researched and studied here. Finally the important concepts of marketing that have pushed or prevented sales of the iphone have been covered. The proposal concludes with suggestions. Market condition and customer behaviour: The mobile phone market in US is growing and in the third quarter of 2007, sales were seen to reach 38million units, an increase of 13% from the previous quarter. As per the NPD group, the increase of sales was noted at 47% as compared to last year. Among various smartphones, iPhone reportedly sold approximately 525,000 phones (BBC News, 2007) within the first week of sales as per the Los Angles times. Market reviews later revealed that while the phone lived up to its hyped image of providing many attractions in one package, it performed poorly in functioning as a basic phone. Dissatisfaction with other factors like battery life, camera performance and inability to play flash or Java were also reported. Competition: The market statistics as per NPD were for third quarter as under, Companies Selling brands Market share Motorola Motorola RAZR V3, Motorola RAZR V3m, Motorola MOTOKRZR K1m, Motorola V323i/V325i 31% LG LG VX8300, LG Chocolate VX8550/8500, LG VX5300 17% Samsung Samsung SGH-A707 16% Nokia 11% Sanyo Sanyo Katana II 4% Market condition and customer behaviour in UK: The iPhone was launched in Europe during the end of the year in a 3G version, supposedly after its poor performance in US markets as a phone. Statistics1 here reveal that 77% users do not use data services like picture and video messaging. Customer reviews for the iPhone have been both positive and negative. Competition: European markets are dominated by Nokia, Motorola, Samsung and Sony. Apple and its Iphone As per Steve Jobs, iPhone has scope to become the third main business for Apple after its iPod and Mac computer. The organization states that by the end of 2008, Apple hopes to sell ten million phones, and grab one percent share of the mobile phone market (Jobs, 2007). The iPhone combines in it a mobile phone and an iPod. With a wide screen and virtual keyboard, it has a new user interface. The instrument thus allows users to enjoy multimedia applications, Internet and much more content through its interface. The quad band phone uses GSM standards and comes with international capabilities. Literature overview Buzz marketing or word of mouth is ten times more effective than print or TV2 and more important today than anytime in the past (Hughes, 2004). As per Regis McKenna, 'Word of mouth is probably the

The Role of Instruction in Second Language Acquisition Essay

The Role of Instruction in Second Language Acquisition - Essay Example The researches and scientific studies had probed dimensions of learning a second language and its effectiveness. It also has been an interesting field to explore for linguists. Many people contend with the stand that for the learning to be consummate, it had to be instructed the natural way; others dispute that the instruction of traditional methods in the classroom will provide a deeper understanding and comprehension of the language. The language that is the target to be learned is referred to as L2, and the acquisition; the second language acquisition is known as the L2A, or much better known as SLA. Formal instruction possesses a profound effect in the everyday endeavors of learners who are trying to gain fluency and mastery of a second language, so therefore, the rule of formal instruction in the process of learning a second language must be investigated and examined thoroughly. Moreover, it complements the best way to make instruction effective and helpful. Numerous studies have been carried out to investigate whether the ways of instruction alters the sequence of the learners’ acquisition, and also, whether the learners acquire the language in the way the naturalistic learners do. II. Instruction in Second Language Acquisition A. Theories About Second Language Acquisition One of the most emphasized concepts about second language learning is that some individuals are more inclined to learning a second language than other individuals. But there are factors to be considered before uttering such statements, such as age, motivation, ability, and socio-psychological factors.

Management of Organisations Assignment Example | Topics and Well Written Essays - 2500 words

Management of Organisations - Assignment Example 1.) Therefore, organisational performance should be measured. Assessing an organisation's performance also helps to determine whether or not the company has a clear mission (one that addresses the needs of a particular marketplace) and whether or not people on all levels of the organisation understand the mission. Assessing the performance also allows the organisation to review the mission statement and to determine if the mission is referenced when developing organizational strategies. Assessing an organisation's performance will help to determine the procedure and processes that are set in place and whether or not these are in compliance with federal, state, and local laws. Examining the current ethics compliance programs (if there is one) and the processes which are set in place to assess compliance with accounting and financial management system helps to determine if the system that human resource uses is effective. Examining how the organisation measures employee satisfaction and how it handles employee satisfaction and how the processes of accreditation and certification operate along with their effectiveness can be determined by the assessment of an organisation. These methods are just some way that a manager can assess internal environment of an organisation. organisation is service oriented and its focus is on the c... The organisation is service oriented and its focus is on the clients. Fitness First is the largest health club operator in the UK and Europe. Having grown from a single health club, twelve years later Fitness First has 1.2 million members in fifteen countries. There are 166 Fitness First clubs in the UK, which is the focus of this case study. They provide top-quality service and equipment at a value price in a non-intimidating environment. Regardless of an individual's current fitness status, they offer the opportunity to improve his/her fitness level.Fitness First strives to deliver its members the best experience each and every time he/she walks through their doors. It was found that the customer service to clients is impeccable. Through word-of-mouth, feedback, increased membership, etc. the assessment of this portion of the organisation was excellent. However, the assessment of employees, staff, and policies regarding staff were assessed, the results were not the same. The company pl aced much emphasis on meeting the needs of its clients which left a gap in meeting the needs of its employees. Perhaps by implementing Investors in People, the largest health club operator, which caters to people can also provide cater to their people (employee) and reach its objectives more effectively. Management 4 In order to improve the company's weaknesses, based on findings during the assessment, the company decided to invest in its staff and employees in addition to investing in its clients. Taylor & Thackwray, (1996:1), as cited in Scutt (1998) stated that, "Investment in equipment depreciates whilst investment in people appreciates". As this quote points out, investing in people will deliver a huge return.

Economics Essay Example | Topics and Well Written Essays - 2500 words

Economics - Essay Example A monopolist does not have to worry about any such retaliation due to imperfect competition. There are too many barriers of entry into a monopolistic market for new firms. The biggest barrier is that of economy. A monopolist is able to produce his product at a very low cost and it is not possible for the other producers to produce at such a low cost. The competitors are not able to invest in capital like the monopolist invests. The technology that is available to the monopolist is also not available to the competitors. Therefore, the monopolist lowers the price of his product at such a level at which other producers cannot survive. This way, the competitors are driven out of the competition. When this happens, the monopolist raises the price of his product at his desired level again. Another aspect of monopoly is the network effect. The product of the monopolist has no close substitutes. The new consumers also tend to use the monopolist’s product because it becomes a social no rm and a fashion. This is why the demand for his product is always likely to increase. This aspect also serves as a barrier of entry for new firms and as another incentive for monopolist to raise price. Patents and copyrights provide legal protection to a monopolist from competitors. Generally, a monopolist earns supernormal profit which means that the marginal revenue is lower than the price. The demand curve for the monopolist’s product is relatively inelastic. This means that any change in price does not affect the demand for the product. Monopoly is one of the rare scenarios in which the demand for the product is relatively inelastic. Normally, the price goes up in this case because it is very easy for the monopolist. In a competitive market, it is very hard to raise the price of the product because the competitors do not follow the new price. The demand for the product in perfect competition is perfectly elastic and there is no demand if a single firm raises its price. T here is no such case in monopoly. A monopolist has a great influence on the consumers. There are times when a monopolist has to face some retaliation from the consumers when he raises the price unreasonably. In order to deal with this situation, he uses his control on supply. He cuts the level of supply at his own will and it becomes hard for the consumers to get their hands on the monopolist’s product. When they do find the product, they are willing to pay the price asked by the monopolist. This way, the monopolist curbs the reaction of the public and earns real economic profit during the process. However, he does lose some of his customers in the process because the demand for his product is not perfectly elastic and some of the customers are no longer able to afford the product. His ability to control supply and affect the consumers is another barrier for his competitors. Another tactic for a monopolist to make high profit is price discrimination. He segregates the market into two parts. The consumers who need his product more or have an ability to pay more are charged high prices. The rest of the consumers are charged lower prices. Price discrimination works successfully and is profitable when the elasticity of demand of one market is different from that of the separated market. This way, the monopolist earns more profit from the market whose elasticity of de

Position summary letter(supply chain major) Essay

Position summary letter(supply chain major) - Essay Example At the Bayer health care, I would be using those skills to manage the supply chain at an international scale and ensure that the organization’s reputations and profit are taken to another level. On the other hand, at HighJump, those skills would be used to initiate and implement projects to ensure that there is effective service provision need a proper network is established between the organization and its stakeholders. Bayer healthcare (BHC) conducts research and manufactures new therapeutic products and uses scientific technology to create better living conditions for both humans and animals. Research and development is focused on cardiology, women's health care and diagnostic imaging. The company aims at filling the gaps left by other medical and pharmaceutical providers to ensure that its impact is felt by those who really require their services. The company is also supported by manufacturers in different countries who depend on its products to ensure quality and cost-eff ective of its products globally. Responsibilities include initiating activities that will ensure timely and effective supply of the manufactured products to the market place. Thus, the suitable person is expected to be updated on changing demands and improvements in the market as well as within the industry. To liaise with global supply chain systems and synergies to smoothen business deals, reduce costs and ensure that the targeted returns are attained through effectiveness. In addition, the person is expected to provide leadership and have excellent interpersonal relations so that different employee contributions can be recognized and appreciated. Thus, the manager is expected to lead by example through showing accountability both at personal and professional level. The manager will ensure effective communication with the company executives, staff and other stakeholders to the global level to ensure that information is disseminated in a timely and effective manner. My qualificatio ns that make me a suitable and competitive candidate for the position include: I am pursuing a bachelors degree in supply chain and this has equipped me with the necessary knowledge to understand procurement operations. In addition, I have a good understanding of SAP and supply chain management of the knowledge I have gained in my course. I have good leadership and interpersonal skills which I will use to enhance collaboration and ensure that there is transparency in the organization. Moreover, I have good human resource management skills which will come in handy to enhance talent acquisition and creation of international partnerships with the organization's stakeholders. I have good communication skills both oral and written which will enhance communication of both complex and simple issues with the staff and other stakeholders. High jump supply chain management software necessitates the flow of information and inventory in a cost effective and timely manner. The organizationâ€⠄¢s aim to meet market and customer needs through the provision of logistic services, packaging, healthcare, distribution and manufacturing of goods. The company enables its business partners and clients to access their services at low cost and minimizes ownership costs. The company establishes a working relationship with its clients through creating sessions to allow for interactive

Communication in International Management Essay

Communication in International Management - Essay Example Advertisements can be made out for anything, and other common advertisements include those made out for political and religious purposes. The targeted audience usually does advertising for commercial purposes to increase the consumption of an advertiser’s goods or services. Advertising can be done on numerous mediums through the intended message to the target audience is delivered. Any surface or place that a sponsor pays for in order for that space to carry their message to a target audience is referred to as advertising. This paper seeks to discuss advertising with relation to communication in international management by highlighting on a Moodle advertisement. The advertisement of choice is one about a company called Genius Gluten Free that deals with baked products like cakes and breads. I have chosen this advertisement because it is a simple advertisement in its presentation and it delivers the message intended by the product’s producers. The advertisement is also c omposed of the two most important elements of an advertisement making it a good choice for the purposes of this paper. The advertisement fulfils most of what a typical advertisement should in terms of raising the audiences’ awareness about the product, increases their knowledge, and works on their liking capability (Ott, 2011 p108). The advert also plays on the audiences’ convictions about product suitability to their lives and ultimately their purchasing power and ability (Volkman, 2006 p14). There various goals and objectives that advertisements seek to fulfil with respect to the products and the target audience that adverts are directed towards (Mukerji, 2011 p8). The means ends theory suggests that a message in an advert should lead to a desired change in a consumer that is beneficial to the advertiser (Zou, Shaoming, and Volz, Y. Z 52). According to Zou, Shaoming, and Volz, Y. Z (54), leveraging involves using adverts to direct consumers’ understanding abou t a product’s benefits that are relevant to their lives and their personal values. This is meant to drive the consumer to purchase the advertised product in an effort to improve their lives and/or add value to their lives. Meaning in adverts is brought out through the application of various aspects of advertising. In the Moodle advertisement for the Genius Gluten Free baked products, there is the use of both pictures and words, which serve to reinforce each other’s intended message to the target audience. An advert has various functions depending on the target audience for the product or service. Advertising functions include marketing, social, communication and economic functions, which are all external functions of advertising (Shimp, 2010 p13). In the Moodle advert, the function of the advert can be construed to be directed at serving a marketing and social function. This is because it addresses the nutritional benefit of Genius Gluten Free baked products to the hea lth of the consumer. The advertisement includes image and word messages that reinforce each other’s meaning towards establishing the intended impact on the customer and potential clients. The advertisement utilizes the use of images and words, which are held either as captions or as plain text. The advert has an image of what seems like a loaf of bread wrapped in semi-transparent plastic paper with inscriptions about the nature of the bread. The plastic paper wrapping has colouring of Maroon and Yellow or Orange. The colour is

EFFECTS OF FETAL ALCOHOL SYNDROME Research Paper

EFFECTS OF FETAL ALCOHOL SYNDROME - Research Paper Example Collectively, the range of disorders is known as fetal alcohol spectrum disorders (FASD).† (Mayo clinic staff) Fetal alcohol exposure is the leading known cause of many mental problems in the western world. It is difficult for the westerners to avoid liquor completely from their daily routine food habits because of the climatic conditions and the cultural peculiarities. Drug/alcohol addiction is one of the curses for the western countries. â€Å"Its estimated that each year in the United States, 1 in every 750 infants is born with a pattern of physical, developmental, and functional problems referred to as fetal alcohol syndrome (FAS), while another 40,000 are born with fetal alcohol effects (FAE)† (Fetal alcohol syndrome) There is no scientific support for the type of widespread hysteria that permeates public discussion on fetal alcohol syndrome. (Prof. Hanson) Though the fact, excessive use of alcohol during pregnancy can cause problems to the child, proved beyond doubts, there are still doubts about the results of normal usages of drinks during pregnancy period. Many people still believe that a single drink daily may not cause many problems to the offspring even at the pregnancy period. â€Å"When you drink alcohol, it enters your bloodstream and reaches your developing fetus by crossing the placenta. Because a fetus metabolizes alcohol more slowly than an adult does, your developing babys blood alcohol concentrations are higher than those in your body. The presence of alcohol can impair optimal nutrition for your babys developing tissues and organs and can damage brain cells.† (Mayo clinic staff) A person’s important phase of development is his childhood before and after birth. All his future personalities will depend on his personal health both physical and mental during this period. If the brain cells damaged during childhood it is difficult to replace it and hence problems can occur at later stages. Low birth weight, small

The change in the relationship between Macbeth and Lady Macbeth Essay Example for Free

The change in the relationship between Macbeth and Lady Macbeth Essay The banquet scene is a pivotal one. Discuss this comment in terms of plot, staging, character and relationships, particularly the change in the relationship between Macbeth and Lady Macbeth. Act 3, scene four of Macbeth the play, by William Shakespeare contains many of the themes that run throughout the play, which make the scene such a pivotal one. A main theme of the play is witchcraft and the supernatural. This is symbolised by the witches, and Macbeths vow to visit them the following day- I will to-morrow (and betimes I will) to the Weird Sisters. and is also, more importantly, present in the form of Banquos ghost in the banquet scene. This theme of the supernatural is not only vital to the plot, but was written into the play specifically to please King James 1 of England. The play was written, and performed in 1606, with the aim of impressing the new king. Shakespeare knew that King James was greatly interested in witchcraft and the supernatural- so much so that the king actually wrote a book called Daemonologie all about supernatural occurrences. Therefore, in order to make the play appealing for the king, Shakespeare included witches and a running theme of the supernatural. Another feature of the play included for the new King, is the character of Banquo. The inspiration for the story actually came from real life, in 11th century Scotland, but was changed to suit the melodrama of a play. The character of Banquo was based on a real ancestor of King James, and this, therefore, associated the king further with the plot. Banquo is shown as the good character throughout, matching Macbeths courage and bravery in war, but lacking the ambition that grips him and eventually drives him to murder. This is shown earlier in the play, when the witches predict the future. Macbeths strong sense of ambition takes over and he follows up what the witches told him. Banquo, however, does not pursue the idea. An incident that greatly affects scene four is the murder of Duncan by Macbeth. This is the beginning of the line of murders that Macbeth commits- this he does himself, others using assassins- and where he effectively steps into the blood. It is here that the tragic hero makes his fate. It is, in fact, Banquos murder in act three, scene three that confirms the swing of doubtful wrong to definite evil for Macbeth. Macbeth himself confirms this change at the end of act 3 scene 4 by saying I am in blood steppd in so far, that should I wade no more returning were as tedious as go oer and we are yet but young in deed . Another feature of act 3 scene 4 is the obvious change in relationship between Macbeth and Lady Macbeth, and Macbeth and his Lords. Evidence of the first can be found earlier in the play, where Lady Macbeth and her husband have a very trusting relationship, and plot Duncans murder together. When Macbeth feels nervous about killing Duncan, Lady Macbeth reassures him, knowing exactly how to make him change his mind- Wouldst thou have that which thou esteemst the ornament of life, and live a coward in thine own esteem, letting I dare not wait upon I would, like the poor cat I the adage? It is evident throughout the play that Macbeth does not like people doubting his manliness I dare do all that may become a man; who dares do more, is none., and Lady Macbeth has obviously picked up on this. For instance in act two, scene four, when Macbeth has doubts about killing Duncan, Lady Macbeth says When you durst do it, then you were a man: and to be so much more than what you were, you would be so much more the man. After she says this, Macbeth goes ahead with the murder, showing the effect his wife has on him Lady Macbeth holds the same want of power as Macbeth, and both think of killing the king before talking to the other about it. This shows that they know the way the other thinks, and want the same things. When we first see the couple meet, Macbeth greets his wife by saying My dearest love which shows his obvious affection for her. However, scene four of act three is a pivotal one in terms of the relationship between Lady Macbeth and her husband. A massive change in the relationship is evident throughout the scene. Here we see that he has not let her in on the murder of Banquo, and as he hallucinates about Banquos ghost, he still does not tell her of his deed. Lady Macbeths love of her husband and fear of getting caught is shown by her desperate attempt to conceal his guilt and to get rid of the guests. However, the change in the relationship between the two is possibly more of a reflection on the change in Macbeths character, rather than the relationship its self. Macbeths growing distrust is also shown in this scene, resulting in the break down of the so far successful relationship between he and his wife. As he goes on in his plans, his circle of trust is slowly closing in and now even his wife, whom he plotted the first murder with, is on the outside. She is not aware that he has employed the murder of Banquo and Fleance, and she thinks the ghost he sees is that of Duncan. This also shows the difference in the twos view on their relationship. Lady Macbeth, at this point, has no idea that she is being left out of proceedings, and feels she and her husband have plotted together throughout. Macbeth however, knows that he has kept Banquos murder from her, and therefore is beginning to feel that her can not even trust her. This suggests that the breakdown of their relationship has more to do with a change in Macbeths character than the relationship itself. The distrust taking over Macbeth is also evident in act three, scene three, where he hires a third murderer to ensure that Banquo and Fleance are killed. The banquet scene not only shows Macbeths character becoming more guarded and distrusting, but shows his shift from good to evil. He decides that his crimes are such that there is no point trying to reform his character. His sense of right and wrong has disintegrated into a need for power. He no longer feels as much guilt for his murders, and sees no way out of what he has already done. This is shown in the line I am in blood steppd in so far, that should I wade no more returning were as tedious as go oer . The line we are yet but young in deed also shows that Macbeth has no intention of stopping the murders, and has more plans in mind. Another change in relationship that is evident in the scene is that of Macbeth and his lords. This scene is pivotal in that we see an obvious suspicion of Macbeth from the lords that until now has been very subtle. They are startled by their new kings behaviour, and begin to question him- What sights, my lord? Lady Macbeth picks up on this and becomes worried that her husband will reveal the truth about Duncans murder. This is shown by her haste to remove the lords from the room- Stand not upon the order of your going, but go at once. This is a contrast with the calmness at the start of the scene, where everyone is civilised and relaxed, and shows the disorder brought on by the death of Banquo and his ghost. The staging of the banquet scene is very important in terms of understanding the plot, especially the ghost. If done properly, the scene can be very effective, however if not, the idea of the ghost can become very confusing to the audience. The main issue when thinking of staging is putting the fact that Banquo is now a ghost and that only Macbeth can see him, across to the audience. This can be done in many ways, using different dramatic techniques. The first that could be used, is a cinematic projection of the character onto the stage. This could flicker slightly every now and again, emphasising the fact that the ghost is not real. The image would be of Banquo walking to the chair, and sitting down, projected onto a plain background or even just the scenery. I think this would be especially effective because the audience can see what Macbeth is seeing, but at the same time are aware that it is not real. While the image is playing, the rest of the cast could be brought into freeze frame while Macbeth reacts to the ghost, once again emphasising the fact that the ghost is only visible to Macbeth. The lights around the rest of the cast could also be brought down, adding to the effect made by the freeze frame. Meanwhile, a spotlight could shine on Macbeth, not only showing that he can see the ghost, but that he is now almost totally alone in his plans. Earlier it was he and Lady Macbeth that plotted together, but now he is on his own, trusting only himself. The projected image of Banquo would be the same character that played him in the performance however a costume change would be needed in order to make it authentic. The character would have to have rips in his costume, and blood and wounds on his face. This would show the audience that Banquo was in fact dead and this was his ghost. Costume change is a useful technique that would make the next idea more feasible. The actual character that played Banquo could play the ghost, and appear back on stage. This idea would be slightly less clear to the audience, but could still work. The character, once again, could have ripped clothes and blood and wounds on his face, although more care would have to be taken in order to make it clear to the audience that Banquo is actually dead. Lights could be used to great effect with this idea, for instance the main lights could go down, then lights could shine upwards on Banquo. This would give more of a spooky feel, and increase the feeling of the supernatural. Here, once again, a spotlight could be shone on Macbeth, signifying his isolation form the people he was once close to. Another way to do the lights would be to shine a spotlight on Banquo and Macbeth, leaving the others in the room in darkness. This would show that only those two were involved in the action, and could also signify the fact that they are the only two in the room that know of Banquos murder. Here, instead of using the technique of freeze frame the other characters in the scene could be moving around as they would normally be, but in silence. This would show that no one has noticed Macbeths strange behaviour yet. When using a real person, routes onto stage have to be thought of. Trapdoors could be used to give the idea that the ghost is just appearing out of no where, then disappearing, using smoke to camouflage what is happening. Another way the ghost could be hidden from the audience is just by using the wings. The ghost could enter from one side, then leave from the other, hiding in the wings, then reappearing. When the ghost enters the lights should be brought down, then brightened up again immediately as the ghost leaves. As the lights come up, the rest of the cast could come out of the freeze frame, or begin to talk if freeze frame is not used, showing that they had not seen the ghost at all. In conclusion, when considering staging plot and relationships, the banquet scene is a particularly important one. It shows a huge change in relationships between Macbeth and his wife, and his friends. It is here that the tragic hero can either redeem himself, or fall further into the clutches of despair. Macbeth chooses the easy option of continuing down the same road, blocking out the people he was once close to. Therefore, this scene is pivotal and shows changes in attitudes, relationships and, most importantly, character.

The marketing strategy of business network transformation

The marketing strategy of business network transformation By definition, Business Network Transformation (BNT) is a marketing strategy in which companies will adopt a different path which normally companies would follow in order to be more competitive in this dynamic business world. The two major phenomenons that are most important from any companys perspective would be faster technological innovation with respect to products services and being a reliable supplier. Extension model: Companies adopt the extension model to spread out their business to gain new piece of business with increasing demand. The following are the important aspects of Business Network Transformation   Ã‚     Value proposition: It is important to explicit the type of products or services the company provide to its customers. Moreover, it gives a unique value between a business and prospects of the business. It is also a strategic asset which forms a basis for Market and its strategy , Business Planning , Partner and competitors strategy , operations, Customer service and Pricing . Customer Interface   Ã‚     Target customer: This describes how the customer segments are targeted to achieve a profitable growth.   Ã‚  Ã‚  Distribution channel: This describes how the product reaches the customer by various routes. Relationship: This explains how the firm is linked with the customer through its various customer segments. Infrastructure Management   Ã‚     Value configuration: It specifies the way in which the various activities and resources of the business are arranged Core competency: This defines how the core competencies required in a business model are executed.   Partner network: This describes how to collaborate with business partners to harvest the benefit out of it. Normal way of running a business is to extract value from companys network which is a tangible asset that bridges the enterprise and consumers in terms of its connectivity capabilities. However, as explained in the definition, now the companys started adopting different way of doing their business by adopting different models whereby value is extracted from intangible assets like e-commerce initiatives, targeted advertising that will eventually generate service fees from performed transactions or commissions. This methodology of obtaining value from intangible assets will certainly outperform tangible asset -based connectivity revenues. The two terms, Present Mode of Operation (PMO) and Future Mode of Operation (FMO) are so vital in current business world. What is required from enterprise point of view is to have additional business models which will a best fit for enterprises Future mode of operation that leads to increase in revenue growth of the company and reduction in companies operational expenses by measuring the intangible assets of the business. Alcatel-lucent, a Tele- communication service provider company has been taken as an example. The company has invested in new IP, IPTV and IMS technologies in order to compete with other service providers who have expanded their network to convergence of voice, data and video services across fixed, wireless and satellite networks. In order to sustain in the competition, some of the service providers are making their current services less expensive, faster and better. Forming new Business Transformation Strategies are inevitable in current business scenario. However, there exist some inhibitions in the minds of service providers that these rapid changes in the business model might disturb current business models revenue. It has been estimated that voice and data subscription services contributes 80% of current revenue. It could be seen that a level of saturation is reached for the traditional model. Due to this saturation limit , the company Alcatel-Lucent decided has decided to go in for the advanced business model not only withstanding to allow the service providers to tap new revenue but to distinguish themselves from competitors by subscription-based businesses. Service providers have to perform critical assessment of Tangible and intangible assets within the legal boundaries in order to evaluate current business model. Return on Investment (ROI) is a main focal point for the service providers which can be achieved by tactical assets selling Real-world Business Model Innovations Due to market demand in communication industry there is increasing pressure from service providers to adopt new business models in order to penetrate through the existing market. The following are Business models in the fields of innovation Sponspered communications M-banking Broadband Community Centres Hosted Platforms Wholesaling Outsourcing Asset-sharing Content Aggregation and Brokering Targeted Advertising UGC and Communities Fulfilment E-Commerce and m-Commerce Sponsored Communications: Advertising through funded calls is one of the important innovations in the field of Telecommunication. There is appreciable change foreseen while comparing the conventional subscription model. Sort of incentives in the form of more talk time and paying lesser are the added benefits extended to the users if they accept to receive advertisement messages. Initially this methodology was put in to use by a UK Based company who manages to offer these sorts of benefits to targeted customers in the age group between sixteen to twenty four year of people, eventually this approach has yielded a reduction in end user access costs to a range between 20 to 50 % M-banking: Due to various socio-economical reasons , it can be seen that in most of the countries may not be having basic banking service to its people , on contrary using mobile faculty is so common in most of the countries . It would be rather difficult and rather expensive to manage transactions for especially for those having smaller accounts through the existing banking system due to inadequate number of branches exist in nations where population explosion is on the drive, especially in the rural areas. These shortcomings can be addressed through the M-banking which uses mobile technology. The technological advancement rather the strategy in the Mobile industry is to develop Mobile pre-paid payment engines that manage real time small transactions by the use of SMS (Short Message Service) which is really a less expensive measure to the Mobile users. This service of Mobile banking has been very successful in many countries especially in growing countries like India and China. A classic example can be quoted from a leading service provider of Telecom situated in Philippines , named as Global Telecom, who introduced a service called G-Cash service which has got electronic valet facility through which the user can send and receive electronically and payments can be made through short message texting . Due to its easiness in use it has been predicted by World Resource Institute that due to its demand, with in 5 years Mobile banking services will be extended to billion customers. Broadband Community Centres: Singapore is one of the typical examples for this feature. Community centres provide Internet facility to its residents there by offering services like e -government Tax payment, application forms, etc . In some countries like Australia, Broad band community centres assume the roles of Bank branches or government agents. Basically these centres serve the residents as a platform in which more industries and social organizations have a greater reach to the people, which become a cost effective measure for the people as well. Hosted Platforms: This approach is implemented by Alcatel-Lucent company in an African country Senegal where it hosted a mobile data centre where the service providers from four other parts of the world make use of it by providing GPRS (General Packet Radio Service) applications that run at a speed of 115 kb/s. Due to this service facility it becomes possible for the service providers are able to provide services to the end user at much shorter time period of 3 months. The main advantage in this business model can be seen from the fact that the service providers those who are in this need to pay to the host company Alcatel-Lucent as and when they use the platform. This is indeed a real benefit for countries which are under developed like Africa where the country may not sufficient users to attract Telecom companies to invest on stand-alone platforms to deliver advance services in the arena of Telecommunication in an efficient and cost effective way. Wholesaling: This type of approach is followed mostly in the developing countries where the network operator resells excess net work capacity to a retail service provider VNO (Virtual Network operator) who in turn offer services to consumers or commercial institutions Outsourcing: This approach becomes more common in most of the countries. Day to day work functions and managing the resources will be given to an external supplier. The business functions that will be offered will be diverged in nature. The external supplier will take care of related work functions of Data storage, financial accounting, Supply Chain management and HR functions like pay roll etc . The major advantage of outsourcing lies on the reduction in the total cost of ownership and extending timely service to the consumers Asset-sharing: The main advantage of this model is sharing overlapping tangible assets between services providers operate same networks in order to eliminate infrastructures that are overlapping among them. Due to this asset -sharing model the service providers can expand the area of coverage and reduce impact on environment to a greater extend. This approach again reduces the total cost of ownership and more innovative services can be provided to their consumers. Content Aggregation and Brokering: The main driver for this business model approach is the concept of UGC (User-generated content) and premium content. The user can directly purchase copy righted multimedia files through video-on-demand and pay-per-view models. What is important in this model is to ensure the integrity of the content that is purchased by the user by adopting digital rights management technology to verify the authenticity of the content. Targeted Advertising: This type of model encompasses interactive connection between people and the type of brands they are looking for through multimedia screens like TV, Mobile and Computer etc Due to the current technological advancements, these multimedia sectors become the essential revenue generating opportunities for the service providers. Premiums paid by the advertisers in this multimedia will add on to the revenue growth to the service provider which is quite substantiated. UGC and Communities: This model is growing day by day in the field of communication. The examples for this model are social network sites like Face book. MySpace, people information sites like TripAdvisor and YouTube. In these user is allowed to generate multimedia content which is distributed instantaneously to the other users. Once the content is created in these applications it can be amended, rated and commented by many group of users. The following are the common types of UGC that includes new sites, Photo sharing sites, service review sites, trip planners, social network sites, boards, blogs and gamming sites. In this concept, forums are used as the platform to share the users knowledge, experience on a topic of interest. The industry which has reaped the benefits out of this model is the broadcasting industry which has gained momentum due to persistent consumer interaction and better service orientation. Another mile stone in this model is getting the users feedback directly by introducing the option of voting via internet or mobile device so that pulse of the user is measured instantaneously. Fulfilment: This model ties the service provider and the user in terms of billing relationship leverage once the transaction is completed and service is delivered to the end user on third parties behalf. A typical example would be downloading a music album to mobile phone via internet E-Commerce and m-Commerce: This model envisages an electronic transaction in terms of buying and selling operations in the mobile services. The following electronic transactions are the typical examples for this model, consumers can use the wireless network infrastructure for Internet banking electronic funds transfers, Internet Marketing, SCM (Supply Chain Management), on line trading and electronic data interchange M-Commerce provides the end user an opportunity to pay for goods purchased using their mobile device. In other words, mobile phones are considered to be Virtual Credit Card with the usual securities in place to avoid tampering in any sort. It can be inferred from the above business model that the main drivers are reduce operational cost and increase top-line revenue. Either of the above action will lead to increase in business margin. Consultative Approach to Business Transformation It is also a newer approach being followed by Alcatel-Lucent to its service providers there by suggesting a right strategic direction by developing a structured and consultative frame work in the form of simple process Step 1 Identifying our customers PMO. Step 2 Understanding the customers top priorities and objectives Step 3 Identifying the customers intended FMO Step 4 Identifying the appropriate products, services and solutions It is anticipated for a failure if the steps are not followed which may lead to negative impact to the business results in a increase in the cost and decrease in the revenues and low margins. Failure to do so can result in negative consequences in the form of a negative spiral of growing costs and flattening or decreasing revenues and margins. The real transformation of PMO to FMO will happen after the service providers going through a transition phase in which the cost for operations will certainly increase due to deployment of new IP based system in terms of legal maintenance . Comprehensive approach to transformation has yielded good result for the enterprise. Strategic Impact Analysis The company Alcatel-Lucent has worked with both kinds of operators the modernizers and the comprehensive business transformers. . Not with standing to the fact that both operators yielded good result , however their strategies will be different . The operator Modernizers gives at most importance to technical details with tactical execution, where as the another operators emphasis is on emerging business needs and implementing strategic objectives . Creating Convergence The challenges are growing as the technology grows, hence the strategies being adopted by the enterprises and service providers should take a realistic and feasible approach in order to move forward with the transformation initiatives that nurtures Consumer relation and profitable growth . Hence creating convergence becomes so vital on the current business environment.. The following layers should be bounded together in order to bring IT and network environments connected at each and every layer of the network User exposure Business process Service abstraction Application Physical / Technical base It is not expected to have one-size-fits-all approach to transformation, however it is imperative to have each transformation initiative evaluated based on respective strategic direction thereby assessed according to its own characteristics and further tailored to meet the need .In this context what is more important is to have clear understanding of Present Mode of Operation (PMO) and to develop strategies to reach required Future Mode of Operation (FMO). Ensuring successful transformation also means finding a knowledgeable, committed network integrator partner that can act as a trusted adviser every step of the way. The best partner brings expertise and experience in IT and networks, as well as a comprehensive services methodology built on best practices and experience to mitigate risk, minimize complexity, capture new revenue, reduce costs, and position organizations to reap the business transformation benefits going forward. Today, the service provider delivers traditional voice and data services while introducing new, innovative media and entertainment offerings that generate new streams of revenue over a common network infrastructure. In addition, the service provider is reaping full advantage from Alcatel-Lucents field-proven solutions and integration expertise, enabling the provider to meet its strategic network and business transformation goals as well as commercial and operational objectives. Conclusion It can be seen from the strategies implemented by the company Alcatel-Lucent clearly exemplifies that business growth was seen by Business coordination, adopting network transformation and extending customer services. It is imperative that the organization and the service providers should start adopting non-traditional ways to monetize their intangible assets e.g. community, location and billing relationship that could be influenced to enhance Consumers trust and confidence The strategies adopted by their service providers determine the emerging demands and define key business drivers that will lead to transformation. Furthermore, these strategies pave path way for a market winning situation by adopting new technologies

Anti-Corrosion in Marine Surface Engineering

Anti-Corrosion in Marine Surface Engineering Surface Engineering: Coatings and Thin Films Technologies INTRODUCTION Surface building alludes to an extensive variety of advancements that plan to outline and change the surface properties of parts. There are two fundamental classes of surface designing techniques that can be utilized to advance the surface properties and the mass materials. These are surface coatings and surface Modifications. Other process include Surface shape design. Surface covering forms include protecting a layer of liquid, semi-liquid or substance material onto a substrate. One of the fundamental elements of surface covering is to change and fortify the surface capacities as opposed to improving the arrangement of the mass material. A few cases of surface covering forms incorporate Physical Vapour Deposition (PVD), Concoction Vapour Deposition (CVD), plasma and warm splashing, sol-gel, cladding and electroplating. Surface modifications procedures can be named solidifying by fire, acceptance, laser or electron bar, high vitality medications, e.g. particle implantation; and dispersion medicines, e.g. carburizing and Nitriding. Surface adjustment procedures are relevant to control rubbing, enhance surface wear and consumption resistance, and change the physical or mechanical properties of the part. Surface alteration medications additionally can be consolidated with surface covering forms, for example laser cladding. This blend improves the bene fits of surface coatings and surface adjustment, consequently accomplishing particular prerequisites and wellness for reason. Surface medicines that cause microstructure changes in the bulk material incorporate warming and cooling/extinguishing through acceptance, fire, laser, and electron bar strategies, or mechanical medications (one illustration is icy working). Surface medicines that modify the science of a surface incorporate carburizing, Nitriding, Carbo-Nitriding, Nitro carburizing, boriding, siliconizing, chromizing and aluminizing Hard facing is another type of surface treatment, where the mass material surface is given a defensive layer of another material having more predominant properties than those of the mass material. An example of this is covering a turbine pump seal joint with a destructive resistive material, to keep salty water from disintegrating the pump. Each strategy for hard confronting, cases of which are covering affidavit, cladding or welding, causes specific physical and concoction impacts on the mass material, some advantageous, some adverse. For instance focuses on which may exist in the defensive material can make issues, however watchful checking and research may restrain these impacts, to ideally create quality, serviceable building parts. The accompanying areas will portray the idea of surface building and the impacts designing situations have on these surfaces. Hard confronting procedures are portrayed in details particularly as to covering statement advances, with specific accentuati on on warm splash strategies, including the HVOF (High Velocity Oxy-Fuel) prepare that utilized as a part of the ebb and flow inquire about. 1.1 Surface Engineering At the point when two surfaces come into contact and relative movement is created, the contact stresses increased because of the generally little rate of load-supporting region. This will result in grating and wear, and potentially even prompt to disappointment. In the high anxiety utilizations of a present day motor or gearbox, there are zones where the weight of metal moving against metal powers away all the greasing up oil and permits warmth to develop. In the instance of extraordinary weight and contact, this warmth is sufficient to momentarily weld the two sections together just before they are broken separated by their development. This consistent weld and break handle which can happen at the nuclear scale bring about drag and wear, which are damaging. On the off chances that the riggings are the parts of a shuttle, and if the single part comes up short, the whole multi-million dollar shuttle would fizzle. So designed surfaces to battle grating and diminish wear is exceedingly alluring. Many materials have been developed to have specific bulk properties, although they have not been particularly optimized for the surface properties. Surface engineering can solve these problems by: Implanting alloying atoms to different depths, thereby improving toughness and fatigue properties; (surface modification) Depositing surface layers, thick or thin, including lubricants; (surface coating) Redesigning the surface shape of the component to distribute stresses. 1.2 Friction, Corrosion, wear Surface engineering techniques solve friction, corrosion, and wear problems. Friction, corrosion and wear are the most common factors that cause engineering failures. In industrialized countries, 7% of GNP represents the cost of friction, wear and corrosion, with the possibility of 1% of this figure being reduced through the use of efficient tribological systems. On a worldwide level, 34% of all lubricants produced are consumed in Europe, with 50% of this being recycled, with a further 2.5 million tonnes being lost in the environment. Corrosion is mainly an electrochemical phenomenon which occurs when metals react with materials in their environment. 1.3 Basic types of Corrosion and wear Fig. 1: Type of corrosion and wear Wear is the dynamic loss of material from a surface. Among the distinctive sorts of wear, rough wear and glue wear ordinarily happen more frequently than others. Grating wear is because of hard particles or hard bulges constrained against and moving along a strong surface. Cement wear is created by restricted holding between reaching strong surfaces prompting to material exchange between the two surfaces or the misfortune from either surface. Cement wear is a run of the mill case of how a delicate material can wear out a harder on. 1.4 Surface Engineering in Marine applications Methods of corrosion protection are based on the theory of corrosion processes. Alterations of the material properties and external environmental characteristics are the factors which can affect the slowing down or stopping of the corrosion process. Corrosion protection in the shipbuilding industry is an important technological process devised to protect the ship from corrosion effects. Even the storage area of plates, profiles and flats in a shipyard exposed to severe environmental conditions. Protection Coating in shipbuilding constitutes of following steps: Preparation of surface Temporary protection workshop Terms of coating Methods of Applying coating 1.5 Preparation of Surface Surface arrangement is a requesting innovative operation in the advancement of the ships body from essential surface readiness of plates, profiles, and pads performed in the programmed establishment .It likewise incorporates a fundamental workshop technique called covering. Shop groundwork in the film thickness 15-25 ÃŽÂ ¼m is utilized for the assurance of steel during the time spent ship development. In any case, compulsory control of the thickness of the coatings for more prominent thickness may unfavourably influence the cutting pace and nature of steel, and in addition the event of mistakes in welding. Optional surface planning is done in the corridors for sand impacting and painting, whereby soil and salt ought to be expelled from the surface of the area, rendering it and sandblasting as per standard ISO 8501-1. This innovative operation infers additional work in welding and crushing and speaks to the pre-gathering attachments. 1.5.1 Temporary protection of surface The principal phase of consumption assurance in the shipbuilding business comprises of the workshop covering (shop groundwork) on the plating profile and pads in a thin film, about of 15 to 25ÃŽÂ ¼m thick, as intemperate film thickness may adversely influence the nature of welding (the event of porosity) and cutting steel. Shop preliminary speaks to quick drying coatings which are utilized for transitory security of steel in the workshop amid ship development and utilization of the last covering framework. Transitory erosion security is performed in the workshop of preparing in mechanized plant beginning from drying sheets, shot impacting and covering as indicated by the ISO standard. Workshop coatings utilized are zinc silicate and epoxy press oxide shop preliminary. Epoxy press oxide is connected to acquire a more prominent thickness, requesting more paint, thusly bringing about higher coats and expanded misfortunes. Today in many shipyards zinc silicate is utilized as shop preliminary (with a share of 25-35 % zinc), which gives a superior quality welding and lessened event of undesirable zinc salts (a compound barely solvent in water and hard to clean from the surface) Shop preliminary must meet the accompanying prerequisites: It should be appropriate for mechanized re-coloring methodology, It have the most limited drying time (3 to 5 minutes), Imperviousness to high temperatures, It shouldnt discharge dangerous gasses amid welding and cutting, It shouldnt adversely influence the welding procedure It should not influence the mechanical properties of welded joints. 1.5.2 Terms of coating Surface readiness principles incorporate a few criteria, tenets and rules for the way toward get ready body metal surfaces. Surface states of steel structures are isolated into four phases: Steel surfaces secured with plant scale and little erosion, Steel surfaces, which have started to erode and from which process scale has begun to peel Steel surface displaying particles of rust or inadequately connected worrying factory scale with the main noticeable sings of setting, Steel surface that is unmistakably consumed and influenced by setting. The way towards planning metal surfaces done by different methods for abrasives. Abrasives are distinctive sorts of materials appropriate for the specific coarseness surface readiness, where the grating particles utilizing packed air are connected to the surface which is to be cleaned. 1.5.3 Method of Applying Coating The innovative procedure of erosion security utilizes diverse techniques for applying coatings by brush, roller or showering (air or airless), where the determination of the methodology influences the speed and nature of works. Paint brush is normally utilized for the methodology touch-up in the insurance of zones, for example, joints, moves, edges, welds and other unpleasant surfaces and setting. In these regions, color entrance is accomplished by applying the correct brushes: it cannot be accomplished by whatever other technique. Paint roller is seldom utilized in light of its deformities, arrangement of little uneven layers, more often than not with little crevices and openings. Applying a covering by splashing depends on scattering the paint as small beads that settle on the working parts. Airless splashing is a strategy that is most basic in the shipbuilding business since it empowers quick use of Paint onto extensive surface, high effect, the likelihood of applying thicker layer, and Great infiltration. ARC SPRAYING PROCESS Thermal spraying method is a process of coating in which a heated material is sprayed on its surface. This type of spraying can provide thick coatings over a large area at high deposition rate. Thermal spraying is classified into Plasma, Wire arc, Flame, Detonation, Warm and cold spraying. 2.1 Overview of Arc spraying process In electric arc spray process, two wires of desired materials act as electrodes are fed to spray gun at controlled feed rate. Compressed gas is also used to atomize and propel the material to the substrate. Fig.2: Schematic diagram of Wire arc spray device In this process, the anode and cathode wires are continuously melted and broken down into tiny droplets which are injected by air jets through a nozzle. The velocity of gas is a few hundreds of m/s but the gas is not heated, allowing operator to keep the substrate temperature below a few 0C without cooling. The arc powers generally range from 2 to 10 KW, airflow ranges from 0.8 to3 m3/min. The temperature of the arc can be as high as 20,000 k. DC generators are used a source for power. Before the arc process is performed, substrate surface is properly cleaned. For this purpose usually the surface is blasted using a compressed air abrasive blasting. This is effective for cleaning mill scaled on steel surface by using abrasive particle at high velocity and also for good adhesion of arc spray process. Along with this the substrate surface roughness is also important consideration to be made for proper coating bonding. To hinder rust formation and provide good bonding the coarse surface profile must be around 110 microns. Garnet is normally used abrasive as it can provide desired surface finish and roughness. As metallic abrasive usually result in energy being given off as a spark which might cause surface defect non -metallic abrasives are used. Fig.3: Arc spray process instrument Before the coating is applied on the substrate surface some conditions need to be satisfied, they are Surface finish must be greater than SA 2.5 as it can be visually inspected Surface roughness must range between 75 microns to 110 microns Permissible level for salt contamination of surface should not exceed 20 mg/m3 Dust level should not exceed the rating 1 2.2 Characteristics of Arc spray process Wire diameter: The wire diameter ranges from 1.6mm to 3.16mm. The deposition rate of coating on the surface depends on the wire diameter. Wire feed rate: This determines the rate at which the material must be introduced to the system, which is proportional to the rate at which the material introduced melts. Coating materials: Metals, cements, ceramics, polymers, carbides are some of the materials used for arc spray process. Solid wires produced from Chromium, zinc nickel based alloys or aluminum are generally used for arc spraying in marine application. Aluminum is considered to have the best performance for surface coating. Spray distance: The distance varies from 15cm to 25cm; the distance affects the deposition area of coating on the surface. Power requirement: Depending on the spraying material, voltage ranges from 16 V to 30 V. The applied voltage controls the input power to the arc which affects the rate at which the tips of the wires are heated and melted. The current is adjusted to 150 A for most of the applications. 2.3 APPLICATION OF ARC SPRAY PROCESS This process is mainly used for corrosion protection. Other than this, it is also applied for coatings of machineries like boiler tube, gear box, shafts and crankshafts in power plants. 2.4 ADVANTAGES AND DISADVANTAGES 2.4.1 Advantages Arc spraying process is economical when compared with other spraying techniques Any coating material can be used. Examples are ceramics, cement metals It has a high deposition rate of the thermal processes Operator requires less training The power requirement is also low Almost all substrate material can be coated Low porosity level can be achieved using this process Its useful as low heating of substrate makes arc spraying process useful in metalizing thermally sensitive substrate 2.4.2 Disadvantages Large amount of fume and dust is produced, which is a cause of concern for the operators health The materials used are limited to electrical conduction It can be sometimes seen that the coating quality does not meet to expectations as done with other technique 3. HOT DIP GALVANIZING 3.1 Overview of Hot Dip Galvanizing This process is used for coating iron an steel with a layer of Zinc by immersing the metal in molten zinc bath at a temperature of about 449 oC. This process forms a metallurgical bond between steel and molten Zinc and is done in a plant with controlled conditions. The bond formed has very good corrosion resistance due to the good molecular adhesion and the cathodic protection. The hot dip galvanization process mainly consists of 4 stages. Surface Preparation Removing oil/grease, dirt, paint etc. from the surface. Pickling in Acid To remove mill/scale. Flux Coating (Usually Zinc Ammonium Chloride) To prevent the oxidation of cleaned surface when exposed to air. Zinc Bath Dipping the material in Zinc bath and holding it until it reaches equilibrium with the bath temperature. Fig.4: Various steps in hot dip galvanizing method In HDG coating, the outermost layer (ETA) is a covering of pure zinc and is formed as the material is withdrawn from the molten Zinc bath. The underlying series of layers (of coating) are zinc-iron alloys and are formed as a result of metallurgical reaction between the molten zinc and the material being galvanized. In HDG process, the coating formed on the corners and edges of the material is generally thicker than the surrounding coating. The reason for this is that the zinc-iron alloys formed would grow perpendicular to the steel surface. The ETA layer is ductile and provides good impact resistance to the galvanized material. The combination of all the layers in the coating provides toughness to the material and also aids in resistance to mechanical damage in transport, erection and service of the components. Fig. 5: Typical cross section of a hot dip galvanized coating 3.2 Variable Parameters The appearance and the thickness of the galvanized coating are affected by several factors. Steel Composition: The galvanizing reaction produces thicker coatings for rough steel surfaces because of the increased surface area and also these coatings would have a poor appearance and would be a rough coating. Bath Immersion time: As galvanization is a diffusion process, the reaction between molten zinc and steel would be quick initially but slows down as the alloy layers grow and become thick. So, continuous immersion or dipping of the material more than once doesnt produce a significantly thicker coating. (Which happens in case of reactive steels) Speed of Withdrawal: The withdrawal rate of material from the galvanizing bath has a significant effect on the outermost layer of the pure zinc. Thickest coating would be formed when the withdrawal is rapid because this allows a large amount of zinc to be carried out on the material which would eventually solidify and become pure zinc layer. On contrary, smooth, thin and uniform coatings are formed with slower withdrawal rates as it allows the zinc to drain back into the kettle. Steel cooling Rate: The dull or matte gray coatings are usually due to slower cooling rates such as air cooling or quenching of thicker sections because the slow cooling would allow the zinc-iron alloying reaction to continue and the inner alloy layers would use the outer ETA layer for their zinc supply. The formation of dull/matte surfaces can be reduced by halting the galvanizing reaction by quickly reducing the temperature to less than 300oF. 3.3 ADVANTAGES AND DISADVANTAGES 3.3.1 Advantages Lower first cost: This process generally has the lowest first cost compared to any other protective coatings for steel. The application cost of painting which is a labor intensive coating has risen far more than the cost of factory applied hot dip galvanizing. Lower maintenance / lower long term cost: In some cases, the initial cost of hot-dip galvanizing is higher than alternative coatings, but it is more cost effective due to its lower maintenance costs during long service life. Maintenance is costlier for structures in remote areas. Maintenance programs have an invariably negative impact on productivity. Long Life:In hot dip galvanized coatings, the life expectancy of structural members is 50 years more than in more rural environments and 10 to 30 years in most corrosive urban and coastal environments. Surface preparation:To ensure uniform cleaning of steel surfaces,they must be immersed in acid whereas organic coatings must be applied on abrasive blast cleaned surfaces and should be verified by third party inspection. Adhesion: This coating is metallurgical bonded to the steel surface. Environment friendly:The coating is non toxic and doesnt contain any volatile substances. Speed of coating application:A full coating can be applied in minutes whereas multi paint coating system takes up to a week. The application of hot dip galvanized coating is not influenced by weather conditions. Uniform protection:Hot dip galvanized surfaces are protected both internally and externally including recesses, sharp corners and inaccessible areas for application of other coating methods. The coating is at least as thick over sharp corners as on flat surfaces. No other coating applied can provide similar uniform protection. Sacrificial protection for damaged areas:A hot dip galvanized coating would preferentially corrode to steel providing cathodic protection to small areas of steel exposed to damage. Toughness:A hot dip galvanized coating has outstanding resistance to mechanical damage during transport, erection and service due to its unique metallurgical structure. Disadvantages This process can only be carried out in a galvanizing plant and on site application is not possible. The color of the zinc coating can only be changed by painting the coated surface. The size of the zinc bath is a limiting factor for the component or structure dimensions. There is probability of distortion/warp of large flat unsupported sheet components and long, slender beams due to the high molten zinc temperature. The welding of the zinc coated steel would need different procedures as compared to the uncoated steel. During welding of hot-dip galvanized steel, there is a loss of coating in the first and second heat affected zones, but a portion of the coating remains right up to the edge of the weld. COMPARISON OF ARC SPRAY PROCESS AND HOT DIP GALVANIZING FOR COATING OF SHIP HULL As studied in the sections before both Arc Spray Process and Hot Dip Galvanizing has their advantages and disadvantages. In this section we will compare both these process based on important characteristics and try to find out which one would be a better suitable process for coating of ship hulls. 4.1 Surface Preparation Hot Dip Galvanizing requires specific surface preparation consisting of Degreasing, Pickling and in Flux solution, not only these surface preparation method requires special setup, but processes such as Pickling can introduce Hydrogen in the substrate causing Hydrogen embrittlement and Hydrogen Induced Cracking, however if the substrate steel is not cleaned properly the zinc will not bond with it and it may be noticed at that stage only. Surface preparation for Arc Spray requires the surface to be little coarse which can be done by abrasive air blasting which depends on the operators experience, but if the cleaning is not done properly it may not be detected then. Thus surface preparation by Hot Dip Galvanizing is advantageous. 4.2. Coverage Arc spray process cannot be used for coating of corners, edges and complex shapes such as threads and hollow section, all of which can be coated easily by hot dip galvanizing as it is a dip process. Since ship hulls are large bulky object which doesnt have any such complex shape both processes can be used here but still Hot Dip Galvanizing will be more beneficial. 4.3. Process Time and Economy Hot Dip Galvanizing takes less time as it can coat almost all the surface area at one go when dipped inside the bath whereas Arc spray process is a line by line process and hence takes more time. The equipment cost for arc spray is lower, its setup is also easier than Hot Dip Galvanizing, and the equipment is mobile whereas the baths for Hot Dip Galvanizing is stationary but this method can cover large area at one go. Therefore for coating of ship hull, Hot Dip Galvanizing is a faster process as they have a very large surface area for which Arc Spray process will take more time and the higher cost of Hot Dip Galvanizing is negated by ability to cover larger surface area at one goes. 4.4. Effect on Substrate For Hot Dip Galvanizing the baths are maintained at a temperature of around 450ÂÂ °C which is just below the austenitizing temperature of steel and hence may cause a change in microstructure of the substrate if there are some variations whereas since no hot jet is directed on the substrate in the arc spray process there is no effect on the underlying substrate. Thus only considering this effect on substrate thermal arc spray process is a better process. 4.5. Coating Thickness The thickness of coating in electric arc spray coating can be regulated by regulating the speed of wire feed in the process, thus it can be easily controlled whereas in Hot Dip Galvanizing a certain thickness may not be specified as the thickness depends on the withdrawal speed which may cause an uneven distributed coating. 4.6. Bond Strength The bond strength for arc spray process for ferrous and non ferrous alloys is within the range of 4000-7000 psi whereas for Hot Dip Galvanizing the bond strength is around 3600 psi, thus arc spray process provides comparatively higher bond strength. 4.7. Hazard Fumes and other hazardous by products are formed during the Hot Dip Galvanizing can pose health hazard to the operators who are working in the shop floor as well as to the environment. Thermal Arc Spray process on the other hand produces metallic dust consisting of very fine particles and fumes; also electric arc spray process operates at high current which can result in shock hazards if not treated with caution. Clearly both processes are hazardous both to human as well as environment. 4.8 Conclusion for comparison Considering all the above factors Hot Dip Galvanizing seems to a better and efficient process for coating of ship hulls, not only coating ship hulls which have large surface area by arc spray a time consuming task it doesnt providing any other significant advantages as compared to Hot Dip Galvanizing. CONCLUSION In this report, we have mentioned the different possibilities for anti-corrosion in marine environment. Here we have taken the two commonly used methods for the protection of ship hull from corrosion. As the instrument for arc spray process is quite cheaper compared to the other techniques, its widely used in marine industry. The coating adherence is good with no heating of the substrate generally; however coating done by this method is porous. The hot -dip galvanizing process is an effective way for resisting corrosion. It is a simple process with better service life. It gives high quality with low environmental pollution making it a good competitive method. After comparing the two methods, we can conclude that arc spray process is used if we want good control and for better quality, on the other hand hot-dip galvanizing is used for mass production as it turns to be economical. 6. REFERENCES [1] Muhamad Hafiz Abd Malek, Nor Hayati Saad, Sunhaji Kiyai Abas, Noriyati Mohd Shah, Thermal Arc Spray Overview, IOP Conf. series: Material science and engineering 46 (2013), doi:10.1088/1757-899X/46/1/012028 [2] M.F.O Schiefler Fiho, A.J.A Buschinelli, F.Gartner, A.Kirsten, J.Voyer, H.Kreye, Influence of process parameters on the quality of thermally sprayed X46Cr13 stainless steel coating, COBEF 2003- Brazilian Manufacturing Congress, 18-21 May 2003, Vol.XXVI, pp 98-106 [3] Website http://www.environment911.org/Environmental_Issues_With_Galvanizing [4] Website http://www.galvanizeit.org/education-and-resources [5] Website https://www.scientific.net/AMR.685.271 [6] Website https://www.upc.edu/sct/en [7] Website http://www.mbicoatings.com/content.cfm/Coatings/Arc-Spraycoatings/ category id/102/page id/170 [8] Website http://www.aeromac.com.sg/thermalsprayadv.html [9]Website http://www.metalplate.com/techdept/characteristics.php [10] Website https://www.canam-construction.com/wp-content/uploads/2014/12/2012-12-hot-dip-galvanization-of-structural-steel.pdf

The Bedroom inThe Yellow Wallpaper by Charlotte Perkins Gilman :: Yellow Wallpaper essays

The Yellow Wallpaper - The Bedroom As the story progresses in, The Yellow Wallpaper, it is as if the space of the bedroom turns in on itself, folding in on the body as the walls take hold of it, epitomizing the narrator's growing intimacy with control. Because the narrator experiences the bedroom in terms of John's draconian organization, she relies on her prior experiences of home in an attempt to allay the alienation and isolation the bedroom creates. Recalling her childhood bedroom, she writes, "I remember what a kindly wink the knobs of our big, old bureau used to have, and there was one chair that always seemed like a strong friend . . . I could always hop into that chair and feel safe" (Gilman 17). Ironically, Gilman's narrator cannot retire to the otherwise "personal haven" of the bedroom because she is always already there, enclosed within the attic room of John's desires, bereft of her own voice and personal history. The narrator's imagination is altogether problematic for John, who would prohibit his wife fr om further fancifulness: "[John] says that with my imaginative power and habit of story-making, a nervous weakness like mine is sure to lead to all manner of excited fancies, and that I ought to use my will and good sense to check the tendency. So I try" (Gilman 15-16). For Gaston Bachelard, who devotes himself to a phenomenological exploration of the home in The Poetics of Space, "imaginative power" is the nucleus of the home, if not the home itself. Memories of prior dwellings are for Bachelard a fundamental aspect of creating new homes based on a continuity with the past and past spaces. "[B]y approaching the house images with care not to break up the solidarity of memory and imagination," writes Bachelard, "we may hope to make others feel all the psychological elasticity of an image that moves us at an unimaginable depth" (6). Bachelard's "elasticity" infers that spatial depth and expansion are contingent upon a psychological flexibility of imagination. Gilman's narrator is nota bly denied this elasticity when her physician/husband attempts to prevent her from writing. "I did write for a while in spite of them," the narrator explains, "but it does exhaust me a good deal--having to be so sly about it, or else meet with heavy opposition" (Gilman 10).

E-mail Essay -- Technology, Communication

Email is the most widely used communication tool within companies today. Email has been described as a curse and a blessing. Email reaches its recipients quickly and can be sent across the globe within seconds. Companies with multiple locations find this essential in communicating. Email can also reach a large number of individuals within a matter of keystrokes. Sending a mass email reaches many recipients with one consistent message. While there are many praises of email, its drawbacks must be considered as well. Email communication can financially impact an organization. Emails sent without a clear message can lead to misinterpretations which ultimately may cost the company money. Employees often complain of receiving up to and sometimes over 100 emails a day and often many do not pertain to them. For each email the employee must read to determine its value to them or spend time reading to perceive a clear message, it reduces the employee’s productivity. Managers and coworkers who use effective email techniques can increase communication accuracy, decrease frustration and increase productivity. BYRON, K. (2008). CARRYING TOO HEAVY A LOAD? THE COMMUNICATION AND MISCOMMUNICATION OF EMOTION BY EMAIL. Academy of Management Review, 33(2), 309-327. doi:10.5465/AMR.2008.31193163 This article provides a unique examination into how the emotion written in email affects its perception. Study results were measured on emails written with positive, negative and neutral emotions. Gender and relationship status were taken into account for this study. The conclusion results suggested that misinterpretations as a result of emotion written within email is inevitable and varies largely from the intended emotion of the sender and th... ...This article addresses the cost of email mistakes and the characteristics of an effective email. The charts provided not only indicate the cost of the mistakes but the hours lost in productivity. Accuracy, clarity, spelling, punctuation, grammar and conciseness were identified as characteristics of an effective email. While this article clearly identifies the cost of ineffective emails and the loss of productivity, it lacks solutions to improve efficient email writing. A source is referenced but lacks detail in study information. Studies within the literature researched support the thesis that the use of effective email techniques can increase communication accuracy, decrease frustration and increase productivity. Elements of a properly written email were identified. Training implementation and measurement proved to improve clarity and productivity.

Nonviolent Offenders Essay -- essays research papers

Nonviolent Offenders – Is Incarceration the Answer?   Ã‚  Ã‚  Ã‚  Ã‚   â€Å"It’s really clear that the most effective way to turn a nonviolent person into a violent one is to send them to prison,† says Harvard University criminologist James Gilligan. The American prison system takes nonviolent offenders and makes them live side-by-side with hardened killers. The very nature of prison, no matter people view it, produces an environment that is inevitably harmful to its residents. America locks up five times more of its' population than any other nation in the world. Due to prison overcrowding, prisoners are currently sleeping on floors, in tents, in converted broom closets and gymnasiums, or even in double or triple bunks in cells, which were designed for one inmate. Why is this happening? The U.S. Judicial System has become so succumbed to the ideal that Imprisonment is the most visibly form of punishment. The current structure of this system is failing terribly. To take people, strip them of their possessions and privacy, expose them to violence on a daily basis, restrict their quality of life to a 5x7ft cell, and deprive them of any meaning to live. This scenario is a standard form of punishment for violent offenders, although not suitable for nonviolent offenders. Today, almost 70% of all prisoners are serving time for nonviolent offenses. U.S. States are spending an average of $100 million per year on new prisons and all U.S. taxpayers front the bill for a system that is not working (Carson). Why should we force taxpayers to pay to keep nonviolent criminals sitting in prison cells where they become bitter, aggressive, and more likely to repeat their offenses when released? The answer is we shouldn’t, there are more reliable forms of punishment available, and rehabilitation and restitution are two alternatives I firmly believe are most effective than incarceration. Nonviolent criminals should be punished differently. This is because nonviolent criminals do not learn from the misery of being in cells with violent inmates. Drug offenders for example are a public health problem, not public safety problem, and nonviolent offenders can be properly educated. We offer convicts no opportunities to learn compassion or take responsibility for what they have done, nor make restitution or offer atonement to their victims in any practical ways. ... ...he certainty of restitution, by requiring monetary payment, takes the profit out of crime (Carson).   Ã‚  Ã‚  Ã‚  Ã‚   Most people have the common view that the criminal justice system’s increasing arrests and imprisonment is an effective strategy for reducing crime. If the judicial system makes greater distinction among violent and nonviolent crimes, the prisons will have the vacancies to incarcerate the Jeffery Dahmers of the world in prison for life. By providing alternatives to imprisonment for nonviolent offenders will reduce the burden of taxpayer’s dollars for added funding for construction of new prisons. I know as a College Student I would like to see increased State funding for education system rather than the millions allocated to the prison system of Pennsylvania. Prisons are not places where nonviolent offenders can serve time and then be released a better person, more fit for society. The prison environment is wrong, and as a result a nonviolent offender will leave unimproved. It is my belief that the alternatives of community control programs, rehabilitation programs, and restitution programs are the answers to the sentencing of nonviolent offenders.

Childcare and Education Essay

B) Evaluate the role of play in meeting the meeting the individual needs of children who are ill Role play is one way in which you can meet the individual needs of children who are ill as it allows the children to freely express themselves and their feelings without the worry of being told what to do and how to do it in a safe environment free from harm an example from one of my day nursery placements was when the room supervisor had the role play area changed to a doctors surgery because quite a lot of children where ill with the chickenpox, so that they weren’t worried about going to the doctors and could act out different scenarios with their friends. Role play is very adaptable and can be changed to meet each individual child’s specific needs an example would be if one of the children in the practitioners care had to go through very serious treatment at the hospital then the practitioner would change the role play area to a mock hospital set up so that the child can express themselves and find out information on what going to hospital is like and for them to be able to explain to their friends what is going on with themselves. Child-led activities and Adult-led activities are another way in which the practitioner can meet the individual needs of a child who is ill, this type of activity allows the child who is ill some control on what their role is in the activity and how they go about completing that role throughout the activity an example from my current primary school placement would be when we did a science experiment on materials. The teacher explained what the children needed to do and showed them a visual demonstration, then the children split into groups of three on separate tables about the classroom. The children then following what the teacher had said carried out the experiment with the different roles split between themselves. One would record the information and draw around the surface splat, another would be dropping the plasticine and the last one would be holding the three different length rulers. Observation and planning helps in meeting the needs of a child who is ill because as a practitioner it allows them to be able to see where the child needs further assistance and for the practitioner to plan the further assistance.